Един от най-добре работещите и използвани еднобатерийни модове на пазара. Предимствата му са, че тежи само 54гр,платката се представя прекрасно във всички режими и се държи доста удобно.
Характеристики:
Battery Type
Interchangeable
Product Type
VW
Compatiable Battery
18650
Power Output
7~85W
Material
ABS + PC
Telescoping Mod
No
Thread Type
510
Variable Voltage (VV)
No
Variable Wattage (VW)
Yes
Charge Style
AC/USB
Package
1 x WYE 85W Mod, 1 x USB Cable, 1 x User Manual
Weight
54g (1.9oz)
Depth
40mm (1.57 inch)
Height
82mm (3.23 inch)
Width
25mm (0.98 inch)
ABS and PC construction; 510 threading connection; Power range: 7~85W (in 0.5W increments); Temperature range: 100~300’C / 200~600’F; Output mode: KA / TC-SS316 / TC-Ni200 / TC-Ti / TCR mode; Taste mode: Norm / Soft / Hard / User; Memory mode: M1 / M2 / M3; Resistance range: 0.1~3ohm (VW), 0.05~1ohm (TC); Powered by 1 x 18650 battery (not included); 5V / 1A USB charging
Определено един от най-познатите и използвани устройства. Този мод е помогнал на много хора да преминат към изпаряване и получава място тук напълно заслужено. Малко и компактно устройство, което дава всичко необходимо, на хората желаещи да преминат към изпаряване.
Features: 1. Tiny and Cute Appearance: With a compact size, you can hold the kit in the palm, much more convenient for usage and portability. 2. Interchangeable 18650 Cell: Users can carry spare cells when on the go and change the cell easily by removing the battery cap only. 3. TC-SS and TCR Modes Available: Despite the compact size, the iStick Pico allows an intelligent but yet satisfying draw with 75W maximum output and switchable VW / Bypass / TC (Ni, Ti, SS, TCR) modes. 4. Unique Bottom Design: The ventilation holes at the bottom are for better heat dissipation and the adjustment buttons are located at the bottom as well. 5. Micro USB Port Charging: The 18650 cell can be charged in the iStick Pico through the side USB port via 1A wall adapter or computer or charged with an external battery charger. The recommended way is to charge the cell externally as it will take less time to give the cell a full charge. Firmware upgrading: The firmware can be upgraded by connecting the device with a computer through the USB port via a micro USB cable.
Един прекрасен DL изпарител, изработен от WOTOFO и Suck My Mod. Диаметърът му е 24мм и събира 4мл течност. Работи много добре и позволява полагане на различен вид намотки. Вкусът му е на добро ниво за подобен тип изпарители и определено заслужава внимание.
Характеристики:
24mm Diameter
4mL Juice Capacity
Superior 304 Stainless Steel Construction
Pyrex Glass Reinforcement
Unique Two-Post Build Deck
Dual Terminal Slots Per Post – Caters to Forward & Reverse Coil Mount
Single Coil Configuration
Dual 4mm Wicking Ports
Dual Exterior Airslots – 11mm by 2mm
Two Internal Stacked Airslots Per Side – 3mm by 1.5mm Each
Определено едно от съкровищата на пазара. Стар и много различен изпарител, който е заслужил уважението на много изпаряващи, защото работи прекрасно и дава всичко необходимо.Устройството е клонирано от различни фирми и повечето от тях са се справили добре. Може да изглежда грозен за повечето хора, но представянето му компенсира това. Има много различни добавки към него,които променят вида и капацитета му, както и го правят по-малък.
Характеристики:
Diameter 23mm Height 86mm Weight 132g 2 posts design Stainless Steel Material Adjustable airflow in 4 sizes 510 stainless steel threading Mouth to lung rebuildable atomizer
Кутията съдържа: 1 x Fev V4 Shield style Atomizer 1 x Pack of Accessories 3 x Adjustable Airflow Screws (Inner diameter: 1.2, 1.4, 2.1mm,, ±0.1mm tolerance)